Medical Device
Manufacturing
THE TRADE PAPER OF THE FACTORY FLOOR
Z-0384-2013Class II

"***SENTINEL***Cannulated Drill Bit***S8585***8.5 X 229mm (9")***CONMED LINVATEC 11311 CONCEPT BLVD LARGO, FL...

Linvatec Corporation / initiated 2012-04-10 / Terminated / root cause: labeling and UDI

Linvatec Corp. dba ConMed Linvatec began a recall of "***SENTINEL***Cannulated Drill Bit***S8585***8.5 X 229mm (9")***CONMED LINVATEC 11311 CONCEPT BLVD LARGO, FL 33773-4908 USA***LOT***2009-02***". This drill... on . FDA classified it as Class II and gives the reason as "Linvatec Corporation dba ConMed Linvatec in Largo, FL is recalling the S8580, 8.0MM SENTINEL Cannulated Drill Bit, lot numbers 322225 and 322226; and the S8585, 8.5MM SENTINEL Cannulated Drill Bit, lot number 322287...". As of , the recall status on record is Terminated, and MDM tags the root cause as labeling and UDI.

Recall record

Recall number
Z-0384-2013
Classification
Class II
Status
Terminated
Initiated
Posted
Terminated
Recalling firm
Linvatec Corporation
Product
"***SENTINEL***Cannulated Drill Bit***S8585***8.5 X 229mm (9")***CONMED LINVATEC 11311 CONCEPT BLVD LARGO, FL 33773-4908 USA***LOT***2009-02***". This drill bit is an eccentric mono-fluted cutting edge for drilling bone tunnels in ACL and PCL reconstruction.
Product code
HTW Bit, Drill
Reason for recall
Linvatec Corporation dba ConMed Linvatec in Largo, FL is recalling the S8580, 8.0MM SENTINEL Cannulated Drill Bit, lot numbers 322225 and 322226; and the S8585, 8.5MM SENTINEL Cannulated Drill Bit, lot number 322287. Recall was initiated due to the incorrect labeling on package.
Root cause tag
labeling and UDI
FDA root cause
Labeling Change Control
Action
ConMed/Linvatec sent an Urgent Medical Device Recall Notificaiton letter via phone and FedEx on April 9, 2012 and again on May 11, 2012, to all affected customers. They also sent the same Notification on May 14, 2012, to international accounts. The letter identified the product, the problem, and the action to be taken by the customer. Customers were instructed to complete a reply formand fax it to 727-319-5701. Customers were also instructed to return all affected product to the firm. All returned product under this removal action will be identified, segregated and quarantined per firm procedures, etc. Customers with questions should contact Customers Service at [email protected]. For questions regarding this recall call 727-392-6464.
Quantity in commerce
70 total
Distribution
Worldwide Distribution - USA including NJ, UT, GA, NY, PA, IL, LA, OH, CA, MS and Internationally to Canada, Japan, and Romania.
Product codes and lots
S8585 (8.5MM Drill Bit), lot number 322287

Enforcement reports

One row per recalled product line
FDA enforcement reports joined to recall event Z-0384-2013
Recall numberClassStatusVoluntary or mandatedReport dateClassified
Z-0383-2013Class IITerminatedVoluntary: Firm initiated
Z-0384-2013Class IITerminatedVoluntary: Firm initiated