Z-2447-2015Class II

cobas b 123 Fluid Pack COOX REF 05170036001 400

Name: Z-2447-2015 cobas b 123 Fluid Pack COOX REF 05170036001 400
Creator: Roche Diagnostics Operations, Inc.
Published: 2015-07-14
License: https://open.fda.gov/license/

Roche Diagnostics GmbH / initiated 2015-07-14 / Terminated / root cause: manufacturing process

FDA source

Roche Diagnostics Operations, Inc. began a recall of cobas b 123 Fluid Pack COOX REF 05170036001 400 Product Usage: The cobas b 123 POC system is a fully automated POC system for whole blood in vitro measurement... on 2015-07-14. FDA classified it as Class II and gives the reason as "Low PO2 results. QC failures of the PO2 parameter, affecting primarily Levels 1 and 2, caused by a calibration issue with the PO2 parameter. This issue may not be detected since QC results can be below mean values, but...". As of 2026-09-10, the recall status on record is Terminated, and MDM tags the root cause as manufacturing process.

Recall record

Recall number: Z-2447-2015
Classification: Class II
Status: Terminated
Initiated: 2015-07-14
Posted: 2015-08-21
Terminated: 2016-01-19
Recalling firm: Roche Diagnostics GmbH
Product: cobas b 123 Fluid Pack COOX REF 05170036001 400 Product Usage: The cobas b 123 POC system is a fully automated POC system for whole blood in vitro measurement of pH, blood gases (B3G), electrolytes NAT, K+, iCaWt (ISE), hematocrit (THct), metabolites (GLu, Lac) total hemoglobin (tHb), hemoglobin derivatives (O2Hb, HHb, COHb, MetHb), and oxygen saturation (SO2). The cobas b 123 POC system calculates derived parameters. Depending on the equipment configuration of the instrument, the Sensor Cartridge and the Fluid Pack used, the following parameters are measured in human whole blood and QC materials.
Product code: CHL Electrode Measurement, Blood-Gases (Pco2, Po2) And Blood Ph
Reason for recall: Low PO2 results. QC failures of the PO2 parameter, affecting primarily Levels 1 and 2, caused by a calibration issue with the PO2 parameter. This issue may not be detected since QC results can be below mean values, but still within 2 standard deviations (SD) limits. Potential for erroneously low PO2 results in patient samples, especially in blood samples with PO2 values below 50 mmHg
Root cause tag: manufacturing process
FDA root cause: Nonconforming Material/Component
Action: Roche sent an Urgent Medical Device Correction letter dated July 14, 2015 and the Fax Back form via UPS ground to the customers list. The letter identified the affected product, problem and actions to be taken. Consignees are instructed to discontinue use of affected Fluid Packs and discard them per local guidlines; and complete and return the enclosed faxback form and fax it to 1-888-943-5171 to receive replacement product for Fluid Packs from the affected lot. For questions contact the Roche Support Network Customer Support Center, 24 hours a day, seven days a week at 1-800-526-2272.
Quantity in commerce: 82 Fluid Packs
Distribution: US Nationwide Distribution in the states of LA, SC, CA, TX, NE, VA and WV including: Puerto Rico.
Product codes and lots: cobas b 123 Fluid Pack COOx Catalog 05170036001, lot numbers 21446113 (exp 9/5/2015), and 21446153( exp 9/24/2015)

Enforcement reports

One row per recalled product line

FDA enforcement reports joined to recall event Z-2447-2015
Recall number	Class	Status	Voluntary or mandated	Report date	Classified
Z-2446-2015	Class II	Terminated	Voluntary: Firm initiated	2015-09-02	2015-08-21
Z-2447-2015	Class II	Terminated	Voluntary: Firm initiated	2015-09-02	2015-08-21

Product code CHL

K111188Class IICobas B 123 Poc System, Cobas B 123 Autoqc Pack Tri-Level, Cobas B 123 Autocvc Pack, Roche Combitrol Plus BRoche Diagnostics / cleared 2012-05-14

MDM coverage of this record lists here, newest first.

About this record

Sourced from the FDA device recall database and the FDA enforcement reports, both ingested from openFDA. The recall record supplies the product, the reason and the product code; the enforcement report supplies the classification. The two datasets are exported by FDA on different days, and the date above is the older of the two, so nothing on this page is newer than it says.

MDM adds the root cause tag, derived from FDA’s own root cause text, and the cross-links to the product code, the clearances named on the record and MDM coverage. Where a recall has not been joined to an enforcement report, no classification is shown.

Data as of 2026-10-14, the FDA export date for this dataset. Page last changed 2026-09-05. View this recall on fda.gov (opens on fda.gov)