Medical Device
Manufacturing
THE TRADE PAPER OF THE FACTORY FLOOR
Z-0815-2018Class II

OTTO BOCK Kenevo knee joints Model 3C60=ST

Otto Bock Healthcare Products GmbH / initiated 2017-09-12 / Terminated / root cause: design

Otto Bock Healthcare Product began a recall of OTTO BOCK Kenevo knee joints Model 3C60=ST on . FDA classified it as Class II and gives the reason as "Otto Bock Healthcare Products GmbH has identified a design issue through extended durability testing where the pylon clamping mechanism has the potential to cause damage to the pylon. When used longer than 1.45 million...". As of , the recall status on record is Terminated, and MDM tags the root cause as design.

Recall record

Recall number
Z-0815-2018
Classification
Class II
Status
Terminated
Initiated
Posted
Terminated
Recalling firm
Otto Bock Healthcare Products GmbH
Product
OTTO BOCK Kenevo knee joints Model 3C60=ST
Product code
ISY Joint, Knee, External Limb Component
Reason for recall
Otto Bock Healthcare Products GmbH has identified a design issue through extended durability testing where the pylon clamping mechanism has the potential to cause damage to the pylon. When used longer than 1.45 million cycles (which represents approximately 2.3 years of use of the knee joint under heavy usage conditions), AND the pylon clamp is overtightened according to the labeled torque specification, AND the patient weighs at most 125kg it may be remote that the pylon breaks, and causing the patient to fall. There have been no failures or complaints reported directly attributed to the failure mode collapsed pylon. In the US Market and in Canada, labeling requires a condition based service at three years. In the rest of the world, a mandatory two year service interval is specified. Only the devices in distribution in the United States and Canada are affected by this action.
Root cause tag
design
FDA root cause
Device Design
Action
On September 14, 2017 a letter was sent to all their consignees via 2nd day signature receipt required to customers instructing them to contact their patients and send in their devices for service within the first 2.3 years of use. The pylon clamp will be replaced at no charge. The pylon will also be inspected and replaced if necessary. The customer will be requested to complete a reply form indicating they have received the notice and intend to contact their patients to arrange for the requested service. Customer Service: (800) 328-3458 Option 1 Loaner Service: (800) 328-3458 Option 3, then Option 1
Quantity in commerce
4
Distribution
AK, AR, AZ, CA, CT, DC, GA, IL, IN, KY, LA, MD, MI, MN, NC, ND, NJ, MN, NY, OH, OK, OR, PA, PR, TX, VA, and WA AU, BE, DE, FR, GB, IT, KW, LU, NL, NO, AT, SA, SE, CH, ES, ZA, and HU
Product codes and lots
Serial Numbers:  201520028, 201520027, 20150026, and 201530040.

Enforcement reports

One row per recalled product line
FDA enforcement reports joined to recall event Z-0815-2018
Recall numberClassStatusVoluntary or mandatedReport dateClassified
Z-0814-2018Class IITerminatedVoluntary: Firm initiated
Z-0815-2018Class IITerminatedVoluntary: Firm initiated