Z-2214-2008
Biomet OSS (Orthopedic Salvage System) RS Non-Modular Long Tibial Base, 75mm x 10 x 160mm, Co-CR-MO/Ti-6AL-4V...
Zimmer GmbH / initiated 2007-11-07 / Terminated / root cause: labeling and UDI
Biomet, Inc. began a recall of Biomet OSS (Orthopedic Salvage System) RS Non-Modular Long Tibial Base, 75mm x 10 x 160mm, Co-CR-MO/Ti-6AL-4V alloy, sterile; Part 161044. Implant is part of a... on . The reason FDA records is "Mislabeled as to size: Product is labeled as reduced size, but is actually standard size". As of , the recall status on record is Terminated, and MDM tags the root cause as labeling and UDI.
Recall record
- Recall number
- Z-2214-2008
- Status
- Terminated
- Initiated
- Posted
- Terminated
- Recalling firm
- Zimmer GmbH
- Product
- Biomet OSS (Orthopedic Salvage System) RS Non-Modular Long Tibial Base, 75mm x 10 x 160mm, Co-CR-MO/Ti-6AL-4V alloy, sterile; Part 161044. Implant is part of a system used to replace the tibial portion of the knee joint.
- Product code
- JDI Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Cemented
- Reason for recall
- Mislabeled as to size: Product is labeled as reduced size, but is actually standard size.
- Root cause tag
- labeling and UDI
- FDA root cause
- Labeling mix-ups
- Action
- Consignees were notified by an Urgent Medical Device Recall Notice letter dated 11/7/07. The letter required that use of the product be immediately discontinued and that components be returned to Biomet. Letters to hospital administrators and the five implanting surgeons were issued on/or about 5/6/08 advising them of the problem and to perform patient evaluations.
- Quantity in commerce
- 22
- Distribution
- Nationwide Distribution --- including states of California, Florida, Illinois, Indiana, Massachusetts, Missouri, New Jersey, Oklahoma, Pennsylvania, Texas, Virginia and Washington.
- Product codes and lots
- Lots 173950, Exp 09/2016; 188380, Exp 09/2016; 459420, Exp 11/2016; 534920, Exp 04/2017 and 802650, Exp 12/2016.
FIRST ARTICLE / WEEKLY
What cleared, what was recalled, and what changed in the standards. One edition a week for the people who make medical devices.
