Medical Device
Manufacturing
THE TRADE PAPER OF THE FACTORY FLOOR
Z-0260-2012

Product is a synthetic absorbable suture with needle and labeled as sterile. The product is sealed inside an...

C P Medical Inc. / initiated 2009-01-02 / Terminated / root cause: manufacturing process

C P Medical Inc. began a recall of Product is a synthetic absorbable suture with needle and labeled as sterile. The product is sealed inside an inner foil pouch with an outside Tyvek pouch. The... on . The reason FDA records is "The seal integrity of the outer product pouch may be compromised due to partial delamination of the two layers that make up part of the pouch". As of , the recall status on record is Terminated, and MDM tags the root cause as manufacturing process.

Recall record

Recall number
Z-0260-2012
Status
Terminated
Initiated
Posted
Terminated
Recalling firm
C P Medical Inc.
Product
Product is a synthetic absorbable suture with needle and labeled as sterile. The product is sealed inside an inner foil pouch with an outside Tyvek pouch. The outer sterile barrier seal is intact. The product is boxed and shrink wrapped for protection against contamination. The product is a Violet, monofilament synthetic absorbable suture with needle, size 3/0 (2.0 Metric), NFS-2 Needle (Product code 398A-Polyglycolic Acid) or size 2/0 (3.0 Metric) NFS-1 Needle. (Product code 453A-Polyglycolic Acid). Product is labeled in part: "***NFS-1***CUTTING***Coated POLYGLYCOLIC ACID Violet (PGA) Braided Absorbable Suture STERILE***Manufacturer CP Medical***". Intended for use in general soft tissue approximation and/or ligation including use in pediatric cardiovascular tissue where growth is expected to occur, and ophthalmic surgery. The suture is not recommended for adult cardiac tissue, microsurgery or neural tissue. The absorbable sutures are useful where extended wound support is desirable.
Product code
GAM Suture, Absorbable, Synthetic, Polyglycolic Acid
Reason for recall
The seal integrity of the outer product pouch may be compromised due to partial delamination of the two layers that make up part of the pouch.
Root cause tag
manufacturing process
FDA root cause
Nonconforming Material/Component
Action
CP Medical, Inc. sent a "RECALL NOTICE" letter dated January 5, 2009 to all affected customers.The letter describes the product, problem, and the actions to be taken by the customers. Customers are instructed to identify affected product and to return the product to the firm. Customers should call 1-503-232-1555 for a return goods authorization number and shipping account number. Contact your customer service representative at 1-800-950-2763 for questions concerning this recall.
Quantity in commerce
13632 sutures
Distribution
Nationwide Distribution
Product codes and lots
398A and 453A